INTERTECHNO ITF-100 Manual De Instrucciones página 31

GB
Operating instructions
ITF-100
If further wireless scene transmitters ITF-100 or e.g. ITKL-30 are to be
used for scene switching, the additional transmitters only have to be
taught into the wireless receivers as this will synchronise the scenes
automatically.
Affixing Fig. 4
The mounting plate is even easy to affix to glass, wood, wallpaper or
tiles...easy to mount.
Double-sided adhesive tape and screws are included.
The handheld transmitter which controls the wireless scene switch can
be put on the table or taken with you.
Caution: Avoid shielding through metal objects.
Battery replacement
A 3 V CR2450 battery which is sufficient for approx. 20,000 switching
operations (service life approx. 3 years) is included.
If the battery is running out, the red LED will flash every 4 seconds.
Change the battery as shown in Fig. 5 using a flat-head screwdriver.
Safety instruction:
Do not ingest batteries, risk of burning due to dangerous substances.
This product contains a button cell battery. If the button cell battery
is swallowed, severe internal burns can occur within just 2 hours and
cause death. Keep new and used batteries out of the reach of children.
If the battery compartment does not close securely, do not use the
product and keep it away from children. If you think that batteries have
been swallowed or are in any part of the body, seek medical attention
immediately.
To view the Declaration of Conformity, please visit
www.intertechno.at/CE
›