BabyGo FreeMove Instrucciones De Montaje página 18

BabyGO
2. Pull the 3-point belt (lap and shoulder belt) through belt guide slot at the back part of the car
seat. Please make sure that the seat belt lays flat and is not twisted.
Force the car seat against the back of the vehicle seat while pulling the shoulder portion
of the vehicle belt to remove slack and tighten the lap portion of the vehicle belt, and then
buckle it until you hear a noticeable "click" (fig.2).
3. Press the harness adjuster lever with one hand, then pull the shoulder belt
harness forward with the other hand to loosen it (fig.3).
4. To unfasten the harness, release the buckle by sliding the red button towards.
Then pull the harness clips and put the harness straps aside (fig.4).
18
BabyGO • www.babygo.eu
ASSEMBLY INSTRUCTION
Motion | Sportline
FreeMove | GoSafe