OK. OPD 400 Manual De Instrucciones página 43

basIc c�nnectI�n
c�nnectInG t� tV
1 2
c�nnectInG t� aMPlIFIer anD tV
1 2
1. Use coaxial cable (not included) to connect
COAXIAL output to COAXIAL type digital audio input
of amplifier. Connect Y, CB/PB, CR/PR video outputs
to respective inputs of TV.
or
2. Use audio cable to connect 5.1. audio outputs (red/
white) to 5.1. audio inputs of amplifier. Connect video
output (yellow) to video input of TV.
c�nnectInG t� P�wer s�urce
Plug in the appliance. The power indicator
turns red with the unit being in standby
mode.
43
3 1. Use Scart cable (not included) to connect Scart
output to Scart input of a TV.
2. Use A/V cable to connect video output (yellow) and
audio outputs (red/white) to respective inputs of TV.
3. Connect HDMI faucet to respective input of a TV.
c�nnectInG t� auDI� systeM anD tV
1
1. Use audio cable to connect audio outputs (white-FL,
red-FR) to audio inputs of amplifier. Connect Y, CB/
PB, CR/PR video outputs to respective inputs of TV.
en