Section 2 − Specifications; Specifications; Duty Cycle - WeldCraft CS31012 Manual Del Operador

2-1. Specifications

Ampere Rating
Cooling Method
Cooling Requirements
Tungsten Size
Cable Options
Dimensions

2-2. Duty Cycle

0
Definition
10
Duty Cycle is percentage of 10
minutes that torch can weld at
rated load without overheating.
Minutes
NOTICE − Exceeding rated amperage can damage torch and void warranty (see Section 2-1).
SECTION 2 − SPECIFICATIONS
CS310-12
310 Amps W/Argon Gas @ 100% Duty Cycle DCEN, ACHF
12-1/2 ft (3.8 m) Three-Piece Super Flex
Length: 6-1/2 in. (165 mm); Handle Diameter: 15/16 in. (24 mm); Weight: 4.9 oz (140 g)
Model
Water
1.1 quart/minute (1.0 liter/minute)
.020 Thru 1/8 in. (0.5 Thru 3.2 mm)
25 ft (7.6 m) Three-Piece Super Flex
100% Duty Cycle At 310 Amperes Using Argon Gas
Continuous Welding
CS310-25
sb1.5* 8/93
OM-225 426 Page 3