nedis WIFIHTPL20FWT Guia De Inicio Rapido página 5

•
Do not pull the power cord to shut down the
heater, always use the on/off switch.
• Do not pull the power cord to move the product.
• Fully extend the power cord and make sure the
power cord does not contact the product.
• In case of failure, shut down the heater, unplug
the power cord and have it serviced by a
qualified technician.
Movable with wheels (image C)
1
1. Place A
upside down.
7
2. Place A on the bottom of A
4 Make sure the screw holes are aligned.
3. Use a screw driver to mount A
4. Turn the heater upright and plug the power cord
in a grounded wall socket.
Wall mounted heater (image D)
- WARNING
•
Mount the product at least 150 mm from the
floor and at least 500 mm from the ceiling.
• Do not mount the product directly under a wall
socket.
• Check whether the wall can hold the weight of
the product.
•
Use anchors suitable for your type of wall only.
1. Drill 2 holes, as indicated in image D.
2. Insert the anchors A
3. Insert the screws A
from the wall.
4. Hang the heater on the wall.
5. Plug the power cord in a wall socket.
4
The product will switch off automatically when
overheating.
Setting date and time
1. Turn on the power switch A
3
2. Press B to turn on the heater.
4
3. Press B to turn on the display.
7
4. Press B to open the date and time setting.
7
5. Press B for 3 seconds to change the time.
5 8
6. Press B or B
7
7. Press B
for 3 seconds.
5 8
8. Press B or B
4
9. Press B
to confirm the time and exit or wait
for 5 seconds.
WIFIHTPL20FWT_MAN_COMP_0919_(19350 1422)_v02.indd 5
1
.
7 1
to A .
6
.
5
, let them protrude 6 mm
4
.
to change the hour.
to change the minutes.
Setting the temperature manually
5 8
Press B or B to change the temperature.
Use the Nedis SmartLife app
You can control the product with your phone and
the Nedis SmartLife app.
1. Download the Nedis SmartLife app for Android
or iOS on your phone via Google Play or the
Apple App Store.
2. Create an account with your mobile phone
number or your e-mail address.
3. Switch on the heater using power switch A
4. Tap + in the Nedis SmartLife app.
5. Select the device type you want to add from the list.
6. Confirm the indicator LED B
5
the + button B
for 5 seconds to reset the heater.
7. Follow the instructions in the Nedis SmartLife app.
4
Make sure you connect the product to a 2.4 GHz
Wi-Fi network.
8. After adding the product, you can rename it and
assign it to a room. After confirming you can
control the heater with your smart phone.
For more information about how the app works,
consult the extended manual online.
To connect your SmartLife account to Amazon Alexa
and/or Google Home, set it up using the "Smart Life"
action or skill. For more details check the instruction
on either Amazon or Google.
Specifications
Product
Article number
Dimensions (l x w x h)
Weight
Input voltage
Rated input power
Setting
Overheating protection
temperature
IP rating
5
4
.
2
is blinking fast, or hold
Panel convection heater
WIFIHTPL20FWT
830 x 260 x 520 mm
(with wheels)
830 x 90 x 465 mm (wall
mounted)
7.9 kg
AC 220 - 240 V ~ 50
/ 60 Hz
1800 - 2000 W
1000 W / 2000 W
105 °C
IP24
30-8-2019 12:25:27