Publicidad
Idiomas disponibles
Idiomas disponibles
Using the respiration monitor belt
To accurately record respiration rates, you must first
properly attach the respiration monitor belt to the user.
Note: The belt works through clothing though try to
minimize layers for the best readings possible.
1. Unwrap the respiration belt and locate the Velcro
connection pads.
2. Place the respiration belt so the Velcro pads are
facing outwards.
3. Wrap the respiration belt tightly, without causing
discomfort, around the user's lower ribs and
diaphragm area.
4. Ensure that the rubber tubing connected directly to
the respiration belt is situated above the user's naval
facing downwards.
5. Close the air pressure release valve by twisting the
metallic knob until it tightens.
6. Use the hand-pump to fill the respiration belt's
bladder until it forms a snug but not uncomfortable
fit.
7. Run an experiment following one of the following
guides.
V2018.01
19
Home
English
Publicidad
