SystemRoMedic TurnSafe2 Manual De Usuario página 4

English
Assembly
2
Adjustment of leg supports and support handles
The support handle and the leg supports can be set at eight different positions by pressing the safety buttons and moving
to the desired height. Ensure that the safety button is properly secured in the hole.
The leg support can aldo be set in different sideways possitions. Make sure that the leg supports are symmetric to each
other.
The footplate and placement of the feet
The feet is to be placed centered och each side of the foot plate.
The weight of the user must be inside the area of the foot plate, i. e the user must be in a standing possition.
The weight and gravity point of the user may never be outside of the foot plate!
4
TurnSafe consists of three sections that can be easily disassembled for
storage and transport.
The lower mast is secured to the footplate with three screws (1).
Insert the upper mast with leg supports and support handle, and push into
place (2).
1
U S E R M A N U A L SystemRoMedic
TM