König SAS-IPCAM100B Manual De Uso página 8

Programme Loading
2
The status LED will flash red for about 15 seconds.
Searching Wi‑Fi Router
3
The status LED will flash green until the Wi-Fi
router is found (up to 5 minutes).
Once the router is found, the status LED will
become orange.
If the IP camera cannot connect to the Wi-Fi
router, please check the Wi-Fi router status or
re-install.
In the app, select the camera name that is
shown in the Camera List, and the viewing
window will open (see Figure 15).
Add already installed IP camera to the app
ANDROID (for Apple go to: Step 5)
1
Open the "uCare Cam" app and select:
: Click here to import installed Wi-Fi Camera
In the Camera List Window screen (see Figure 16) for adding an IP
camera.
Select the tab:
2
Your device will now enter the QR code mode.
Note: you need to have a QR code scanner installed on your device.
Locate the QR code on the backside of the IP camera and scan the QR
3
code. After scanning the QR code, the UID (Unique ID code) appears in
the screen of your device (see Figure 17).
Enter a personal camera name and password and select the tab:
4
(see Figure 17).
The new camera will be added to the list (see Figure 18).
Figure 15
8
ENGLISH