Touch Panel - Mysmüd Home Manual De Usuario

1. Measuring cup
2. Jar lid
3. Seal ring
4. Blender jar
5. Main unit
6. Rubber foot
7. Safety lock

3. TOUCH PANEL

1
2
3
4
1. LCD Display
2. Time + key
3. Time - key
4. ON/OFF key
5. Wash key
6. Speed + key
7. Speed - key
8. Pulse key
9. Preset program
4. OPERATING INSTRUCTIONS
ON/OFF KEY
~ Once time and speed settings are set or a preset
program is selected, press this button to start the
operation press again to stop.
TIME SETTING (TIME + AND TIME –)
~ When the preset time is less than 1 minute,
pressing time setting buttons will increate or de-
crease 5 seconds.
~ When the preset time exceeds 1 minutes ,pres-
sing the time setting buttons will increate or de-
crease 10 seconds.
~ The longest time is 10 minutes , if it is set to
00:00,the blender has no action.
Note: Do not operate continuously for more than
10 min each time.
EN - 5
SPEED SETTING (SPEED + AND SPEED -)
~ Rotation speed can be set by pressing the speed
setting buttons(speed +/speed -). The display
shows the current speed (1,2,3,4,5,6,7,8,9,H).
~ The speed can be modified anytime during ope-
ration unless a preset program is selected.
Pulse (Momentary Blending)
~ Under stand-by mode, select the desired speed
by pressing the speed setting buttons (speed +/
speed -). Hold down the "pulse" button to start
blending at the set the speed. Keep blending until
5
the desired consistency is reached. Operation will
6
stop as soon as the button is released.
7
8 PRESET PROGRAMS
To use the preset program, the user should first
9
select the desired preset program. The program
icon will light up showing the selection. Then press
the on/off button to start. Press the on/off button
again to stop the operation:
~ WASH: This setting is the combination of high
speed and pulse operation Speed H for 8 sec and
pause for 2 sec. Repeat for six cycles. Total time
is 1 min.
~ AUTO: The motor speed increase gradually from
setting 1 to speed 7 in 5 sec, then accelerate to
speed H in 5-10 sec and keep this speed until fini-
sh. Total time is 3 min.
~ CHOPPING/TROCEAR:
pause for 1 sec, then repeat for 4 cycles. Total
time is 7 sec.
~ ICECREAM/HELADO:
pause for 1 sec, then speed H for 60 sec. Total
time is 2 min.
~ PUREES/PURÉS:
for for 1 sec. repeat for 5 cycles. Then speed H for
45 sec. Total time 1 min.
~ SOUPS/SOPAS:
speed H in 10 sec, finally speed H until finish,total
time is 4 min.
~ SMOOTHIES/BATIDOS:
Speed 1 for for 2 sec. Repeat for 3 cycles. Total
time 30 sec.
~ NUTS/FRUTOS SECOS:
speed 8 for 2 sec and pause for 1 sec (repeat 10
times). Total time is 35 sec.
When chopping vegetables, the user should pre-
pare materials first, trying not to use big pieces of
Speed 3 for 1 sec and
Speed H for 60 sec and
Speed 8 for 2 sec and Speed 1
Accelerate from speed 1 to
Speed H for 8 sec and
Speed 5 for 5 sec. Then