Push the tent poles through the sleeves at
the top of the tent until there is an equal
amount of pole on each side.
Once the tent is fully erected, � t the top vent
cover by attaching the clips to the tent straps
Top vent cover
Stretch clips to � t in straps
Pole sleeve
Tent pole
In windy conditions use the four
guy ropes tied to the � xing straps
on the tent corners
Bend and push one end of the poles
into the comer retaining plate, then
bend and push the other end of the
poles into the opposite corner.
Pole sleeves
Mesh door
Door tie back
Secure the tent down by pushing
the pegs through the outermost
hole on the comer retaining plates
Guy rope � xing
Peg
GB
Tent pole � xing
Tent pole � xing
Guy rope
15