Muffler Installation - Cyclo Vac HD Serie Manual De Instrucciones

Muffler Installation

1. Insert the rubber coupling on the vacuum air exhaust.
2. Using a Phillips screwdriver, tighten the clamp collar to ensure adequate
sealing.
3. Insert the 90° elbow into the rubber coupling, and tighten the clamp collar as
per instructions in step 2.
4. Apply ABS glue to the 90° elbow and insert muffler.
10
C
B
A
D
Installation
A. Rubber coupling
B. 90° elbow
C. Muffler
D. Air Exhaust
Glue not included.