Service Centre; Cleaning And Maintenance - MAX RANGER 625973 Manual De Instrucciones

In� ation (� g. 1)
Place the required nipple (1) on the
connector for in� ation (2).
Plug the pump into a mains socket.
Place the nipple in the valve on the object
to be in� ated.
Switch the pump on using the on/off
button (4).
Once the object is suffi ciently in� ated, turn
off the pump, pull the nipple out and close
the valve.
If the pump starts to sound strained, turn it
off immediately.
De� ation (� g. 2)
Place the required nipple (1) on the
connector for de� ation (3).
Plug the pump into a mains socket.
Place the nipple in the valve on the object
to be de� ated.
Switch the pump on using the on/off
button (4).
Once the object has been fully de� ated,
turn off the pump and pull the nipple out.
While de� ating, make sure that a vacuum
is not formed to avoid the pump becoming
overloaded.

Cleaning and maintenance

The outside of the pump should be brushed
down or wiped with a well-wrung cloth.

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com
GB
15