Intended Use - DeWalt DW860 Manual De Instrucciones

• Wear protective clothing and wash exposed areas with
soap and water. Allowing dust to get into your mouth, eyes, or
lay on the skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disburse dust,
which may cause serious and permanent respiratory or other injury.
Always use NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles away from face
and body.
WARNING: ALWAYS USE SAFETY GLASSES. Everyday
eyeglasses are NOT safety glasses. Also use face or dust mask if
cutting operation is dusty. All users and bystanders MUST ALWAYS
wear certified safety equipment:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
WARNING: Wear appropriate hearing protection during use.
Under some conditions and duration of use, noise from this product
may contribute to hearing loss.
• The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ............ volts
Hz .......... hertz
min ......... minutes
....... direct current
........... Class I Construction
............... (grounded)
............ Class II Construction
............... (double insulated)
BPM....... beats per minute
sfpm ...... surface feet
.............. per minute (sfpm)
A ............amperes
W ...........watts
..........alternating current
n o ...........no load speed
...........earthing terminal
...........safety alert symbol
.../min ....revolutions or
...............reciprocation
..............per minute
DESCRIPTION (FIG. 1)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.

INTENDED USE

These tile cutters are designed for professional tile cutting
applications.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
These tile saws are professional power tools. DO NOT let children
come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
FIG. 1
A
H
D
F
E
G
I
J
A. On/off switch
B. Lock-on button
C. Depth of cut adjustment lever
D. Shoe
E. Blade
F. External flange
6
B
K
M
C
N
L
G. Blade screw
H. Brush cap
I. Socket wrench
J. Spanner
K. Water valve lever
L. Water pressure regulator