Active Era Queen Manual De Instrucciones página 4

Deflation
1. Open the cover at the top of the bed where
the power cord is stored
Make sure the manual inflation valve is
2.
closed
3. Plug the power cord into an electrical outlet
4. Turn the control dial anti-clockwise until the
arrow points to DEFLATE (image 3)
The airbed will take up to 3 minutes to
5.
deflate
6. When the airbed is fully deflated, turn the
control dial one click clockwise until the
arrow points to OFF
Unplug the cord and store in the power cord
7.
compartment
STORAGE
Deflate the airbed following the 'deflation' instructions.
1.
2. Make sure the airbed is clean and dry.
3. Lay bed flat with sleeping surface facing upwards. Fold the airbed loosely and
avoid sharp bends, corners and creases which can damage the airbed.
Store the air bed in cool and dry location.
4.
MAINTENANCE
1. Use soapy water to clean the surface of the airbed. Do not use any chemicals.
2. No air pump maintenance is required.
To repair punctures to the airbed, use only common PVC repair glue and
3.
patches. Do not use flammable aerosols on the surface of the airbed.
3 | English
Image 3