Product Description - Dörr VL-26 Manual De Instrucciones

02 | PRODUCT DESCRIPTION

·
Versatile LED ring light for video-blogs, selfies, beauty videos etc.
·
The soft light reduces skin imperfections and creates a natural, circle reflection in the eye
·
3 dimmable light modes: cold light, mixed light, warm light
·
With variable smartphone holder, ball head, table tripod and extendable mini tripod
03 | NOMENCLATURE
01 LED ring light
01a) ¼" screw mount
02 Rotatable swivel mount
02a) Locking screw
02b) ¼" screw mount
03 USB cable
03a) USB A plug
04 Control unit
04a) On/Off button
04b) Button –
04c) Button colour temperature
04d) Button +
05 Ball head
05a) ¼" screw mount
05b) ¼" screw thread
05c) Locking screw
06 Smartphone holder
06a) ¼" screw mount
07 Knurled screw with ¼" screw thread on both sides
08 Table tripod
08a) ¼" screw thread
09 Mini tripod
09a) Ball head with ¼" screw thread
09b) Locking screw
04 | MOUNTING
1. Mount the LED ring light (01) on the table tripod (08) by screwing the ¼" screw thread (08a) into the ¼"screw mount (02b) of the
rotatable swivel mount (02).
2. Loosen/fix the locking screw (02a) to tilt or to turn the LED ring light.
3. Screw the knurled screw (07) into the ¼" screw mount (01a) of the LED ring light.
4. Mount the ball head (05) onto the knurled screw (07) by screwing the ¼ "screw mount (05a) on the ¼" screw thread of the
knurled screw (07).
5. Screw the smartphone holder (06) either with the lateral or the lower ¼" thread mount (06a) onto the ¼" screw thread (05b) of
the ball head (05). Spread the clamps of the smartphone holder (06) apart, insert your smartphone and carefully release the
clamps to hold the smartphone in place.
6. Loosen/fix the locking screw (05c) of the ball head to adjust your smartphone in the desired position.
7. Accessories such as a microphone can be attached to the supplied mini tripod (09). The tripod legs can be extended in 2 steps.
Loosen/fix the locking screw (09b) to adjust your accessories in the desired position.
8 doerr-foto.de