LIGHTSIDE LED BALL Manual De Usuario página 2

LED
BALL
ENGLISH
INTRODUCTION
Thank you for purchasing this LIGHTSIDE LED BALL. For safety and regular
operation of this product, please read this manual carefully before using and
operating it.
CAUTION
- Before placing the light in a pool, remove any oating chemical dispenser.
- Never throw the light into the pool. Place the light on the water gently.
- Do not put the light in the pool when people are swimming.
- Keep remote control away from water, any liquid, or heat.
WARNING
- Never use this light as a oating device
- Do not put the led ball on the water if damage/crack found
- Do not submerge the lights into water
- To reduce the risk of electric shock, never open the light bottom
- External adapter: Never use the external adapter and charger station for purpose other
than battery charging for the lights supplied in the same pack.
The external adapter ,charger station/socket on the light should not be used outdoor
not exposed to rain, humidity, any liquid or heat.
Keep the external adapter and charger station out of the reach of children.
Disconnect the external adapter from power when not in use.
Never attempt to open the external adapter, charger station, or light bottom.
OPERATION
Before rst use, charge the battery for 4 - 8 hours
- Place the charger station on a dry and level surface
- Use clean and dry cloth to clean surface of the charger station and the bottom
of the light
- Insert the adaptor plug into the socket under the charger station
- Connect the external adapter to the electrical outlet
- Indicator light on charger station lights up in green colour
- Place the light properly on the charging base. It will begin to charge and the indicator
light will change to red
1