Installation And Set-Up - Glatz ALU-SMART Manual De Instrucciones Y Opciones

Installation and set-up

1
2
3
Unpack the shade
Supplied with:
- Upper pole with shade canopy
- Lower pole
- Shade finial
- Belt (possibly sewn int)
- Operating instructions
!
Please dispose of the packing material
appropriately and keep away from
children.
Check material for damages
Before first installation check the material
delivered for completeness and sound
condition. Do not install defective
material.
!
In the case of damages, inform the
transport service provider immediately.
Mount the shade finial
1. Put on the shade finial
2. Screw the shade finial on well
3. Check that it is firmly attached
!
Do not use the sunshade without
correctly mounted shade finial.
34 35
4.1
4
Put the sunshade together
1. Loosen the clamping screw sufficiently
2. Push the upper pole into the lower pole
3. Tighten the clamping screw
4.2
4. Check that it is firmly attached
!
In order to avoid damages, do not
over-tighten the clamping screw.
4.3
5
Place shade in base
Set up base on even and stable surface.
i
Shade bases, ground sockets, wall bra-
ckets and/or lawn spikes are available
at your GLATZ dealer.
Minimal base weights
Size
Base weight
[cm] [kg]
ø 200 > 30
ø 220 > 30
ø 250 > 40
ø 300 > 40
210 x 150 > 30
250 x 200 > 40
200 x 200 > 40
240 x 240 > 40
* maximal wind speed with fixed ground
anchorage
Wind speed*
[km/h (Bft.)]
< 75 (9)
< 65 (8)
< 50 (7)
< 35 (5)
< 55 (7)
< 40 (6)
< 50 (7)
< 40 (6)