SPC SPLASH Manual De Usuario página 15

- Press and hold to disconnect from your
current Bluetooth device.
8. Microphone for hands-free.
9. Micro-USB. Connection for charging the
speaker.
10. Vacuum cupule.
11. Speaker.
CHARGING SPEAKER
Connect one end of the USB micro-cable supplied
to the connector (9) on the Speaker and the other
to the USB port on your computer. The Speaker
will begin to charge and the light indicator (2) will
show a fixed red light. When the battery is fully
charged the light will switch off. When the battery
level is low, the battery will emit a tone and switch
off.
IMPORTANT: When charging is finished, close always
the protective rubber, otherwise the unit will be
damaged and lose the guarantee.
15
EN