Publicidad
Idiomas disponibles
Idiomas disponibles
Congratulations on purchasing your
cordless RF flash lamp . We hope it
will provide you with many years of
service. You have chosen a modern
and reliable system.
Please read through the operating
instructions carefully to be able to
start the unit correctly and to fami-
liarise yourself with all of the systems
features.
Standard components
Please check if all following compo-
nents are included:
- RF flash lamp
- Operating instructions
- Warranty card
If any parts are missing please imme-
diately contact your dealer or the
manufacturer directly.
Functional principle
The RF flash lamp receives signals
from various transmitters and con-
verts them into light signals. The RF
flash lamp has a powerful flash tube
which alerts you to a signal and LEDs
displaying the type of signal being
received.
Setting up the system –
Setting the correct radio channel
A special digital transmission pro-
cess ensures that the signals are
picked up without any errors. This
process also enables 10 different
radio channels to be set. The default
setting for the cordless RF flash lamp
is channel 0. It is only necessary to
set units to other channels if you
have several different users opera-
ting units in the same building. Using
a small screw driver, you can set the
channel number you would like to
use.
Installing the cordless RF flash lamp
The various transmission signals are
converted into different sequences of
flashes and signal displays by the
cordless RF flash lamp :
English 9
Publicidad
