Technical Specifications - Topcom AROMA HUMIDIFIER 500 Manual De Usuario

TOPCOM Aroma Humidifier 500
2

Technical specifications

– Moisture capacity: 300ml/h
– Water tank volume: 4,5L
– Rated voltage: 100-240V AC
– Rated frequency: 50Hz
– Rated power: 30W
– Prevent electric-shock protection: Class II
3 Description
1. Handlebar
2. Water tank
3. Water tank nut
4. Scent bottle
5. On/Off button
6. Mist intensity adjustment knob
7. Light
8. Transducer
9. Water flume
10. Nozzle
4 Installation
• Put the humidifier on a flat surface in the room for half an hour. It is important that it reaches the
ambient temperature and humidity.
• We recommend using the humidifier at a temperature between 5 and 40°C and a relative humidity
of less than 55%.
• Remove the water tank
• Turn the water tank up side down.
• Unscrew the cap
• Fill the water tank with clear water (maximum 40°C).
• Close the cover by turning clockwise.
• Verify the cleanliness and water tightness and then gently put the & water tank back on the base.
• Position the fume nozzle
• Plug the power cord in the main power wall connector with dry hands.
It is recommended to use soft (distilled - low-mineral) water to minimize lime scale on the
transducer.
Do not remove the water tank when the humidifier is connected to the main power.
When you remove the water tank after usage, there will still be water in the water flume.
Remove the water from the tank and flume when it is not used for a long period.
Clean the water box, spray mouth and water flume if the humidifier is not used for a long period.
Do not position the humidifier near heat sources or direct sunlight.
Do not aim the fume dispenser to furniture, electronic equipment or baby beds.
4
from the humidifier.
by turning it counter clockwise.
in the desired direction.
10
9
8
7
6
5
1
2
3
4