English
Use this product in dry indoor areas only
and never outdoors.
Place the product on a flat, sturdy and
slip-resistant surface.
Protect this product from extreme heat
and cold as well as from direct sunlight
and dust.
In order to reduce the risk of fire and
electric shock, do not expose the
product to fire (fireplace, grill, candles,
cigarettes and so on) or water (water
drops, water splashes, vases, tubs, ponds
and so on).
Warning! Do not use this product near
water or heavy moisture; e.g. in a damp
basement or beside a swimming pool or
bathtub.
This product is not intended for
commercial use.
It is designed for household use and
similar applications only, such as for
example:
- in employee cafeterias, in stores,
offices and other commercial areas;
- by customers in hotels, motels and
other residential facilities;
- in Bed and Breakfast establishments;
- in farm houses.
Do not fill with milk past the maximum
filling capacity. Hot milk may spray out.
Warning! Never open the lid during the
frothing or heating process.
Warning! Never open the lid during use.
Use the product only with the base
provided.
Risk of burns! Avoid contact with hot
surfaces and escaping steam. Hold the
product only by the handle.
Keep a sufficient safety clearance
around the product. Hot milk can cause
severe scalding.
16
KMF240_A5_130322.indb 16
Do not move or transport the product
during use or while there is hot milk
in the thermos can. Spraying hot milk
poses a risk of burning.
Operate the product only when it is filled
with milk.
Close the lid when frothing or heating.
Parts of the product become very hot.
Unplug the product and let it cool down
sufficiently ...
- when the product is not in use,
- in case of malfunctions,
- before attaching / detaching
accessories and
- before cleaning the product.
Switch off the product and disconnect
from supply before changing accessories
or approaching parts that move in use.
Clean the product and all other
accessories after each use.
Follow the instructions in the chapter
Cleaning and care.
22/3/13 3:16 PM