Product Description - Dörr PS-13528 LED Manual De Instrucciones

03 | PRODUCT DESCRIPTION

The DÖRR Premium Steel torch PS-13528 made of high quality aircraft aluminum is cha-
racterized by high light power and a robust and weatherproof construction. It is perfectly
suited for tough off-road use and for outdoor activities in all weather conditions. Also for
hunting, traveling, camping, in the workshop or in the car the Premium Steel torch is a
reliable light source.
04 | FEATURES
Ultra-bright CREE® LED (lifetime approx. 100.000 hours)
•
Maximum brightness 1000 Lumen
•
Brightness adjustable (100%, 25%) or by dimming
•
Beam distance up to 250 meters
•
Anti-skidding, shock- and weatherproof housing made of aircraft aluminum
•
Water resistant according to protection class IPX7
•
Toughened glass lens with anti-reflective coating
•
Supplied with long-life Li-Ion battery, rechargeable via PC using the supplied USB cord
•
05 | NOMENCLATURE
1 On/Off button
2 LED indicator
3 Screw cap
4 Battery compartment
5 Eyelet to fix lanyard
6 Rubber cover
Micro USB port
7
8 Belt clip
06 | OPERATION
06.1 INSERTING AND CHARGING THE LI-ION BATTERY
Screw-off the screw cap (3) counter clockwise. Insert the supplied Li-Ion battery type
18650 into the battery compartment (4) respecting correct polarity (+/-). Screw on the
cap again.
Before first use, please fully charge the Li-Ion battery:
Flip open the rubber cover (6). The Micro USB port (7) is located underneath the rubber
cover. Connect the torch to your computer using the supplied USB cable. While charging,
the LED indicator (2) lights up red. After approx. 4,5 hours the Li-Ion battery is fully char-
ged and the LED indicator light (2) will turn blue. Remove the Micro USB cable and close
the rubber cover (6) properly to ensure the water resistance.
Once the battery capacity has dropped to about 10%, the LED indicator (2) starts flashing
red. In this case please charge the Li-Ion battery as described above.
1
2
3 3
5
7
4
6
7
8