Before Operation - OK. OTT2040 Manual De Instrucciones

BEFORE OPERATION

1
ASSEMBLY
Place the mat on top of the platter.
Remove the tie securing the tonearm.
Remove the stylus guard.
CONNECTIONS
Before connecting the unit it is advised that you also
consult your current equipment instruction manual.
Note: Be sure to turn o the equipment before you make
changes to the di erent connections.
1. Connect the power cord to an AC outlet.
2. Connect the RCA cable to the PHONO input of your
AMPLIFIER.
Output terminals
L (White)
R (Red)
NOTE: You can also use a line input by setting the phono
/ line switch at the rear of the turntable to line.
3. Connect PC via USB cord.
Ampli er(Receiver)
L Channel
R Channel
2
PC
Set the PHONO/LINE
switch to "LINE".
36
3
Set the PHONO/LINE
switch to "PHONO".