Recording Continuously; Recording When Movement Is Detected; Recording At Night; Recording Sessions - EYENIMAL Cat Manual De Instrucciones

● Recording continuously
To start recording, hold this button in for 3 seconds: . The indicator light will flash blue:
the video cam is recording.
To stop the recording/turn the video cam off, hold in for 3 seconds.
● Recording when movement is detected
Selecting the mode to record when movement is detected will set the video cam to standby
for 3 hours and can be used to only film the activities of your cat when moving.
To start recording in this mode, hold M in for 3 seconds. The indicator light will flash green:
the video cam will only film when your pet moves.
To stop recording, hold M in for 3 seconds again.
● Recording at night
The infrared LEDs will light up automatically when little or no light is available, irrespective
of the recording mode selected. The infrared LEDs can be used to see up to 2 meters in the
dark.
● Recording sessions
Videos are divided into sessions of 30 min.
When the memory is full, the video cam turns itself off automatically. It is
then necessary to delete all or any of the sessions to be able to free memory to
record again.
If battery charge is low, the blue indicator light will flash rapidly.
- Battery autonomy in continuous recording mode during the day: over 2:30
- Battery autonomy in continuous recording mode at night: approx. 2 hours
- Battery autonomy for recording when movement is detected, during the day: up to 3:10
- Battery autonomy for recording when movement is detected + night vision: up to 2:10
The above periods are valid for optimal conditions and may vary with
temperature, light and movement.
● How to view/ delete/ download a video
Connect the video cam (turned off) to your computer using the cable provided. Your
computer should automatically recognize the video cam. You can view, delete or transfer
the recordings using the media player of your choice.
16