Kicker HS10 Manual Del Propietário página 2

Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
The ultra-compact KICKER Hideaway™ Enclosure offers the quickest and easiest way to add a subwoofer to
your vehicle, providing signature KICKER bass in a small enclosure. This system has been meticulously fi ne-
tuned by KICKER engineers to deliver astounding performance and sound without the time-consuming setup
required for a typical amp-sub upgrade.
SPECIFICATIONS
Model:
Subwoofer [in, cm]
Continuous Power Handling [Watts RMS]
Frequency Response [Hz]
Electronic Crossover
Phase Switch
Input Sensitivity
KickEQ™ Bass Boost
Remote Bass Level Control
Start-Stop Compatible
Net weight [lbs., kg]
Height [inches, cm]
Width [inches, cm]
Depth [inches, cm]
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information.
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER powered subwoofer enclosure. Make
sure the mounting screws will not puncture the gas tank/brake lines/wiring or interfere with any mechanical parts
on the underside of the mounting surface. Choose a location that allows at least 4" (10cm) of open ventilation for
the amplifi er. If possible, mount the enclosure in the climate-controlled passenger compartment.
2
MODEL:
POWERED SUBWOOFER
ENCLOSURE Owner's Manual
HS10
HS10
10", 25
180W
25Hz–120Hz
18dB/octave Lowpass 50–120Hz;
24dB/octave Highpass @ 25Hz
0° / 180°
Low Level: 250mV–10V
High Level: 1V–40V
Variable to +6dB @ 40Hz
Included
Yes
11.4, 5.2
3-1/8, 8.1
10-3/8, 26.3
14, 35.4
Hideaway™