Sears Kenmore Elite 721.8758 Serie Manual De Instalación página 11

STEP 3: Prepare he Venting Blower
ROOM-VENTING (Recirculating)
INSTALLATION:
1. Remove one or two blower unit mounting screw(s)
and one or several blower plate mounting screw(s).
Remove the blower plate. See Figure 2 .
2. Carefully lift the blower unit out of the microwave
oven.
See Figure .
. Reassemble the blower wire. See Figure
4. Rotate blower unit 90° so the exhaust ports face
the front of the cabinet. See Figure 2 .
. Place blower unit back into
Be sure the wires are not pinched. See Figure
. Reattach blower plate to microwave oven.
Attach with the one blower unit mounting screw
and then the one or several blower plate
mounting screw(s). See Figure 2 .
Figure 2
.
.
.
Blower Unit
– 1 –
Blower Unit
Parts B
Figure
Figure
Figure 2
Blower Plate
Mounting Screw
Blower Unit
Parts B
Figure 2
Blower Plate
Mounting Screw
Blower Plate
Back Plate
Blower Unit
Mounting Screw
Blower Plate
Back Plate
Blower Unit
Mounting Screw