Dmx Values - afx light PROPAR6-WH Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

1. Press <MENU> until STATIC appears on the LCD screen.
2. Press <ENTER>.
3. Using <UP> and <DOWN>, select the desired color.
4. Press <ENTER>.
5. Using <UP> and <DOWN>, select the desired color value (000~255).
By selecting 000, the color will remain off.
6. Press <ENTER> to continue to the next color (AMBE, WHIT).
7. Using <UP> and <DOWN>, select the desired color value
8. Continue until the desired mix is obtained. The order of colors is warm white and cool white.
9. Press <ENTER> to continue to the strobe setting.
10. Using <UP> and <DOWN>, select the desired strobe value (S000~S020).
By selecting S000, the strobe function will remain off.
11. Press <ENTER> to save the final color setting. This will move the selection to the following color.
However, this is necessary to save the modification.
2. AUTO (Auto Programs Setting)
This mode runs the built-in automatic programs and the user self-edited programs.
Press MENU to select AUTO mode and press ENTER.
Use the UP and DOWN buttons to select the built-in automatic programs or the user self-edited programs.
Built-in auto: AUTO 1 ~ AUTO 05;
Built-in auto program speed: S 000 ~ S 100 (Slow – Fast)
3. ADDRES (DMX Address Setting)
Press MENU to select the ADDRES mode, press ENTER. Then use UP and DOWN buttons to set the desired DMX
address (ADDR 001 - 512)
PERSON (Customized DMX channel setting)
There are 3 DMX channel modes to be selected.
Press MENU to select the PERSON mode, press ENTER. Then use the UP and DOWN buttons to set the DMX channel
modes.
7 Ch
2 Ch
3 Ch
4 Ch
Press ENTER to confirm.

DMX VALUES

This device has 4 DMX modes: 2 / 3 / 4 / 7 DMX channels
Colour Temperature Preset
This fixture has preprogrammed, static color temperature presets that may be triggered without a controller.
1. Remove any DMX controller from the fixture.
2. Press <MENU> to select Color Temperature Preset mode (COLOR).
3. Press <ENTER>.
4. Using <UP> & <DOWN>, select one of the nine (Color1 – Color9) presets.
5. Press <ENTER>.
©Copyright LOTRONIC 2017
PROPAR6 / 18-WH
4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Propar18-wh

Tabla de contenido