Sockets On The Back Of Your Tv - AudioSonic LE-207836 Manual De Usuario

Instruction Manual
soCkets on the sIde of your tV
1. Press "VOL+" or "VOL-" to increase or decrease the volume.
2. Press "CH+" or "CH-" to scan through channels.
3. Press "MENU" to bring up the main menu on the screen.
4. Press "SOURCE" to select the input source.
5. Press "STANDBY" button to turn standby mode on or off.
6. POWERINDICATOR: Show red in standby mode, show green or blue when your TV is switched on.
7. REMOTE SENSOR: Infrared sensor for the remote control
soCkets on the top of your tV
1. DC12V power input for the LED TV, connects power supply adaptor here.
2. Headphone output.
3. Audio input for VGA mode, connects to your PC audio output.
4. DB15 VGA interface.
5. YPBPR/ Component input, connects your AV system.
6. Scart input interface; connects your AV system with Scart output.
7. CVBS / Composite video inputs, connects your AV system.
8. Right/Left Audio Channel input for Composite video & component mode.
9. Coaxial Output, connecting to Coaxial input of your Amplifier.
10. 7 5 Ω aerial input, connects antenna connector or aerial interface here to receive cable / aerial signal.
11. H igh Quality Audio/Video input socket for connecting an external device fitted with an HDMI output.
12. C onnects to portable USB device.
13. P CMCIA input, the card reader input CI (Common interface) this requires CAM (conditional access module) used for pay TV.
1 2 3 4
6
5 6 7 8
6 7
9 10 11
1 2 3 4 5
12 13