Measuring Resistance:
Ω range. Connect red test
Switch the function select or to
lead to „+" terminal and black one to the „COM" terminal.
Connect tip of the test leads to the points where the value of
the resistance is needed. Read the result from the LCD panel.
Note:
When taking measurements from a circuit, make sure the
power is off and all capacitors are discharged.
Testing Continuity:
Ω range. Connect red test
Switch the function selector to
lead to „+" terminal and black one to the „COM" terminal.
Connect tip of the test leads to the points where tests need
to be made. If the resistance is under 100Ω, the beeper will
sound continuously.
11