Bellini Yumi Control Manual Del Usuario página 2

Technical information for Yumi with WiFi
and compatibility with wireless routers
6. The functions of the app are explained within the 'Service' section.
The Yumi supports 802.11b / g / n, 2.4 GHZ with WAP2 password encryption.
The home router must support the repeater mode (1). If the system can meet the
requirements then the Yumi will function in its most advanced way together with the
APP. The Yumi is part of the home WiFi network.
The Yumi does not support the AC and Dual Mode (2.4 / 5.0 GHz).
The Yumi can also be directly connected (2) to the mobile device (tablet / phone),
i.e. it is not part of the home WIFI network. You can download your recipes first over
the home WiFi network or 3G / LTE, then connect directly to the Yumi, send the
downloaded recipes to the Yumi and start the cooking process. If your mobile device
is directly connected to Yumi, you can not simultaneously surf the Internet and
download recipes.
1. Repeater mode
The Yumi is part of the home network. Your wireless device can download recipes,
sent them to the Yumi via the app and surf the internet.
2. Point to point mode
Your mobile device is directly connected to the Yumi.You cannot surf the Internet
or download recipes.
System Requirements (Home Router & Mobile Device)
DHCP
Network Standard:
Wifi Band:
Password Encryption: WAP/WPA2/WEP
Operation Mode:
Android Phone:
Apple Phone or Tablet: iOS 8.1 or higher, iPhone5 or higher, iPad2, iPad Air2, ipad
Mini2 or higher
Copyright
Copyright 2015-2016. This user manual contains copyrighted information. All rights
reserved. No part of these operating instructions can be reproduced using any means
and in whatsoever form - whether mechanical, electronic or otherwise - without prior
written consent from the manufacturer. SUPERCOOK is a brand of plawa-feinwerk-
technik GmbH & Co. KG.
Automatic
802.11 b/g/n
Single@2.4 GHz (AC@5GHz not supported)
Repeater or Point to Point
V 5.I or higher
AUS
2