Basic Photography; Quick Start; Preparing The Camera; Holding The Camera - Oregon Scientific DS6639 Manual Del Usuario

It is recommended that all memory cards are formatted using the Format
option ( p.14) before using them with this digital camera. Memory cards
formatted using other devices may be incompatible.
When the SD card is installed, all images and movies taken are automatically
stored on the card. Images and movies in the internal memory cannot be
accessed until the card is removed.
The SD card will not insert fully into the slot if it is facing the wrong way. Be
careful not to apply undue force to the card.
Installing the SD / Multi-Media Card Removing the SD / Multi-Media Card
1. Ture off the 1. Ture off the
camera. camera.
2. Slide the 2. Push on
card into the the card still
slot until it lodged inside.
clicks into
3. The card
position.
automatically
ejects itself
out of the slot.

BASIC PHOTOGRAPHY

QUICK START

Preparing the Camera

Holding the Camera

1. Slide the Mode Switch to Camera Mode. 1. Hold the
camera firmly.
2. Press and hold the Power button to
turn the camera on. 2. Avoid blocking
the lens and flash.
3. Check the battery indicator, making
sure there is enough power. 3. Do not move
nor remain in
Icon Description motion while
taking pictures.
Adequate power remains
Battery is running low
Battery is running very low.
Battery is exhausted.
4. Loop the strap over your wrist.
6
DS6639 Manual-Eng/Fre/Span (086-003300-060)

Taking Basic Pictures

1. Frame your subject in the viewfinder. You can also view the subject on the OSD.
2. Press the Shutter Release Button.
3. The image taken is displayed on the OSD for approximately a second (Auto
Review).
4. Once the Auto Review has finished, you may proceed to take the next picture.
When memory is full, no more images can be stored. The camera will
beep and the words "Internal Memory Full" or "Memory Card Full" will
appear on the LCD if you press the Shutter Release Button.
5. When you have finished taking your pictures, slide the Mode Switch to Off.

BASIC FUNCTIONS AND SETTINGS

Toggling On-Screen Display Information
When you slide the Mode Switch to any modes, the On-Screen Display (OSD) is
automatically switched on.
Camera Mode On-Screen Display
Quality ( p.16)
Size ( p.16)
Flash Icon ( p.8)
Memory Type ( p.5)
Focus Dial Setting
( p. )
Set Timer ( p.9 )
Audio Tag ( p. )
Battery Level
Indicator ( p.6 )
Current Date ( p.11)
7
ISO ( p.18)
White Balance ( p.17)
File Number
( p.13 )
Zoom Level ( p.9)
Metering ( p.17)
EV ( p.19)
World Time
( p.12)
Current Time
( p.11)