Declaration Of Conformity - nedis MPWL200BK Guia De Inicio Rapido

Switch on the receiver
1. Press and hold the on / off button A
switch on the product.
2. The status indicator LED A
pairing is successful.
3. Connect the AUX plug A
4. Speak into the microphone A
q
• A
flashes slowly to indicate pairing is unsuccessful.
q
• A
flashes fast to indicate that the battery is low.
• Tap and hold A
Volume controlling
• Press the volume+ button A
level.
• Press the volume– button A
level.
Channel controlling
1. Press the channel button A
mode.
y
2. "CH00" A
active. Press A
Lock / Unlock ID
Lock the microphone and receiver to avoid interference by
another microphone or receiver nearby.
4
• Press A
2
• A
flashes slowly to indicate that the ID will be unlocked.
2
• A
flashes fast to indicate that the ID will be locked.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product
MPWL200BK from our brand Nedis
has been tested according to all relevant CE standards and
regulations and that all tests have been passed successfully.
This includes, but is not limited to the RED 2014/53/EU
regulation.
The complete Declaration of Conformity (and the safety
datasheet if applicable) can be found and downloaded via:
nedis.com/mpwl200bk#support
For additional information regarding the compliance, contact
the customer service:
Web: www.nedis.com
9
w
for 3 seconds to switch off the product.
flashes to indicate channel control mode is
4 5
or A
5
and A
for 3 seconds to lock or unlock the ID.
w
for 2 seconds to
q
lights up blue to indicate
to an audio output device.
1
to amplify your voice.
4
to increase the volume
5
to decrease the volume
3
to enter the channel control
to select a channel.
, produced in China,
®
8