Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How To Use The Switch
First, plug the Ethernet cable into one of the eight sockets on the rear of the switch. Then plug the second Ethernet cable
into another one of the sockets on the rear of the switch. You can now make a connection with a Windows
PC.
LED Indicator Specifications
LED
Color
Power
Green
-
Link
Green
Orange
-
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to
incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby
recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should not be
mixed with general household waste. There is a separate collections system for these products.
ENGLISH
Status
Description
ON
This indicator lights when the switch is turned on
OFF
Check the power connection if this indicator is not lit
ON
Indicates that the switch is connected at 1000 Mbps
Blinking
Indicates that the switch is transmitting/receiving data with 1000 Mbps
ON
Indicates that the switch is connected at 10/100Mbps
Blinking
Indicates that the switch is transmitting/receiving data with 10/100 Mbps
OFF
Indicates that the connection has failed
To reduce risk of electric shock, this product should ONLY be opened by an authorized
technician when service is required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product to water or moisture.
2
®
®
/Apple
based
Publicidad
Tabla de contenido
