sabya FKG0100 Manual De Instrucciones página 5

Transmitter
Bell push
Open the transmitter
with screewdriver
Transmitter
1. To open the transmitter, slide a screwdriver below the Bell Push slot,
apply a slight pressure and take the base of the button.
2. Mount the transmitter in an upright position on a wall or doorframe by
using the screws or double-sided sitcky pad supplied.
3. Insert battery
4. Close the cover and press to lock into position
Receiver
1. Slide open the battery cover at the back of the unit.
2. Insert 2 X 1,5 V AA batteries, ensuring the battery polarity matches the
internal marking and lock the cover.
3. This unit can be carried around the house or garden or can be placed
in any convenient location. The mount the door chime, hand the unit on
a screw using keyhole at the back.
Note
1. Use alkaline batteries, they have a longer life time and do not leak
easily.
2. Never use rechargeable batteries
3. Remove the battery if you do not use the chime during a long period
of time
4. Do not fix on metal surface
5. Replace battery if chime sounds distorsed
6. The wireless doorbell has an operating distance of 100 M in open area.
However, local conditions and the number of walls may affect its per-
formance. Metal door frames and other factors that interfere with the
signal will reduce operating distance.
Portable bell
Receiver
Install 2 pcs of 1.5 V AA
alkaline batteries
Adjustable volume
LED indicator
Operates over 100
Large selection of sounds
Button suitable for outdoors
Portable receiver
Bell push
Volume Change melody
ENG
Wireless