Brixton BQ-6394 Manual De Usuario página 6

• For replacement of the gas pressure regulator and hose please see
below table for the correct specifications:
6
• The hose should not be longer than 1.5 meters. Only use approved
connections. The gas pressure regulator must comply with the EN 12864
standard. The gas hose needs to be adjusted if national circumstances
require.
• The hose should comply with the EN 1763-1 standard.
• The gas hose needs to be adjusted if this is required by national
circumstances.
• The gas hose needs to be fitted in such a way that it cannot be twisted.
• Connect the pressure regulator to your gas cylinder.
VERY IMPORTANT:
• The temperature of the regulator may not exceed 60°C (140
• The regulator must be equipped with a safety valve or pressure limiter.
F).
0