Main Unit; Water Tank; Air Filter - Global Industrial 640955 Manual Del Usuario

Maintenance And Cleaning Instructions
Once per week, or more often depending on use, or
when the water tank is full (see water level through front
window), it is recommended to clean the main unit, the
water tank and the air filter following the next steps:

Main Unit

1. Turn OFF the circuit breaker.
2. Clean unit housing with a soft cloth. Do not splatter water into
the unit. Only use neutral cleaning agents. Alcohol can only be
used to disinfect the hand-drying area.

Water Tank

1. Pull the drain tank out in the horizontal direction to ensure the
drained water doesn't splatter out.
2. Pull up the top cover of the water tank, and slowly empty it
over a sink basin.
3. Wash out the interior of the drain tank with clean water and a
soft cloth.
4. Close the water tank with its cover and reinstall the tank in the
hand dryer.
5. Pour 1 cup of water through the drain hole.
High Speed Vertical Hand Dryer
6. Introduce the cleaning brush through the drain hole, and
move it all the way in and out a couple of times.
7. Remove the water from the drain tank as mentioned above.

Air Filter

1. Open the rear door at the bottom of the unit.
2. Pull the used air filter down from the unit.
3. Tap it lightly by hand and use a vacuum cleaner and/or
rinse it directly with clean water and let dry completely.
4. Re-attach air filter to the unit.
5. If air filter is worn out, replace with a new air filter.
5
User Manual