12. Do not handle any part of the plug or machine with wet hands.
13. Do not operate where aerosol (spray) products are being used.
Keep the machine away from flammable areas.
14. Never block the air openings of the machine or place it on a soft
surface, such as a bed or couch, where the air openings may be
blocked. Keep the air openings free of lint, hair, and the like.
15. Do not direct hot air toward eyes or other heat sensitive areas.
16. Remove the plug from the socket when not in use or during a power
outage. Do not pull the plug out by the cord when disconnecting
from the power socket. Do not use an extension cord with this
machine.
17. Do not pull the cord and place heavy items on it. Keep the
cord away from heated surfaces. Do not wrap the cord around
the machine. If the cord is damaged, stop using the machine
immediately and seek advice from Tineco.
18. Do not use any lubricants, cleaning agents, polishes or air fresheners
on any part of the machine.
19. If the machine not working properly, or if it has been dropped,
damaged, or dropped into water, please contact our Customer
Service for support.
20. If the machine overheats, it switches off automatically. Unplug the
machine and let it cool down for a few minutes. Before you switch
the machine on again, check the grilles to make sure they are not
blocked by fluff, hair, etc.
21. In order to avoid a hazard due to inadvertent resetting of the
thermal cutout, this machine must not be supplied through an
external switching device, such as a timer, or connected to a circuit
that is regularly switched on and off by the utility company, or
plugged into any socket where the electrical supply is unstable or
likely to be turned off.
22. The machine has a reset and test button built into the plug, which
should be operated each time the machine is plugged in and
used. To test: Press the test button. The reset button will pop
out, indicating that the machine is safe to use. To reset: unplug
the machine and press the reset button. Plug in again to use your
machine.
23. This machine is provided with a protective device (ALCI Machine
Leakage Circuit Interrupter) that may make the machine inoperable
under some abnormal conditions (such as immersion of the
machine). If the machine becomes inoperable, return the machine to
a service center for examination and repair.
3