MADISON MAD-TA15BT Manual De Instrucciones página 7

Playing a desired track
During playback press Previous or Next button on the remote control to select the
desired track.
BLUETOOTH Input
You can connect the unit to a Bluetooth enabled smartphone or other music player.
Set the ON/OFF switch to ON to turn the system on.
Press the INPUT key on the control panel or the BLUETOOTH key on the remote
control to select BLUETOOTH mode. "SCAN" is displayed.
Pairing a new device
When SCAN is displayed, turn on the Bluetooth feature on your smartphone or
portable music player and enter into 'Search for new device' menu.
Select TA-15BT in the list of found devices.
If your smartphone or portable music player prompts you for a pairing code, enter
0000.
Please note: This audio system cannot connect to computer Bluetooth
Reconnect an existing paired device:
The system reconnects automatically to the last connected device.
Enter into the Bluetooth menu of your smartphone and select TA-15BT from the list
of previously connected devices and select CONNECT. Your device is now reconnected
to the system.
Playback control
The remote can control following functions:
•
Volume up/down
•
Next/previous track
•
Play/pause
•
Mute
Notes:
If pairing fails the first time, turn off your system and back on. Then follow the
procedure from the beginning of this section.
If you are unable to reconnect to a previously connected device, remove or erase the
TA-15BT from the list of paired devices from your smartphone and follow the
instructions of 'Pairing a new device'.
LINE INPUT (RCA sockets)
This system has a L/R stereo RCA line input on the rear panel that is compatible with
any common line output signal audio component.
©Copyright LOTRONIC 2015 MAD-TA15BT 7