General Power Tool Safety Warnings; Electrical Safety; Functional Description - Milwaukee M12 551B-21 Manual Del Operador

GENERAL POWER TOOL SAFETY
WARNINGS
READ ALL SAFETY WARNINGS
WARNING
AND INSTRUCTIONS.
follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
warnings and instructions for future reference.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.

ELECTRICAL SAFETY

• Do not expose hand warmer to rain or wet condi-
tions. Water will increase the risk of electric shock.
• Do not abuse the power cable. Never use the
cord for carrying, pulling or unplugging the hand
warmer. Keep cord away from heat, oil, sharp
edges or moving parts.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when using the hand warmer. Do
not use while you are tired or under the influence
of drugs, alcohol or medication. A moment of inat-
tention may result in serious personal injury.
POWER TOOL USE AND CARE
• Do not use the hand warmer if the power button
does not turn it on and off. Any hand warmer that
cannot be controlled with the power button is danger-
ous and must be repaired.
• Disconnect the battery pack from the hand warmer
before storing. Such preventive safety measures re-
duce the risk of starting the hand warmer accidentally.
• Store out of the reach of children and do not al-
low persons unfamiliar with these instructions
to operate the hand warmer. Hand warmer can be
dangerous in the hands of untrained users.
• Maintain hand warmer. Check for breakage of
parts and any other condition that may affect the
hand warmer's operation. If damaged, have the
hand warmer repaired before use.
• Use the hand warmer in accordance with these
instructions, taking into account the working
conditions and the work to be performed. Use of
the hand warmer for operations different from those
intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
• Use hand warmer only with specifically desig-
nated battery packs. Use of any other battery packs
may create a risk of injury and fire.
• When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
SERVICE
• Have your hand warmer serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the hand
warmer is maintained.
SPECIFIC SAFETY RULES -
Use:
Failure to
• Do not use this hand warmer with an infant, child,
a helpless person, or anyone insensitive to heat,
Save all
such as a person with poor blood circulation.
• If you have a medical condition making you sensi-
tive to overheating, or you use any personal medi-
cal devices, consult the devise manufacturer and/or
your physician to determine if use of this product is
appropriate.
• Never use if inner liner is wet.
• Heating elements are not recommended to touch
bare skin.
• Shut off power immediately if discomfort occurs.
• Do not allow the cords to be pinched.
• If improper operation of this hand warmer is ob-
served, discontinue its use immediately and contact
a MILWAUKEE service facility for repair.
• Do not use pins. They may damage the electric wir-
ing.
Care:
• Before washing, disconnect and remove bat-
tery pack and battery holder from battery holder
pocket. Push the power cord completely into the
battery holder pocket and fasten closed. Remove
the belt from the hand warmer to avoid entangling.
• Follow Care Instructions on jacket tags. Machine
wash, Gentle Cycle in warm water. Tumble Dry
Low Heat.
• Do not bleach.
• Do not iron.
• Do not wring or twist.
• Do not dry clean. Do not use dry-cleaning fluid on
this heated jacket. Do not bleach. Cleaning solvents
may have a deteriorating effect on the insulation of
the heating element.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.

FUNCTIONAL DESCRIPTION

7
6 5
1. Power button
High: Red LED
Medium: White LED
Low: Blue LED
2. Battery controller
pocket
2
HAND WARMER
8
3
4
3. Power cable
4. Power cable port
5. USB power button
6. Fuel guage
7. USB battery controller
8. USB port
1
2