Toolland TC90400 Manual Del Usuario página 4

5. Packaging
 Always check for transport damages after unpacking the device. Also, check if the accessories are included.
Please contact your local dealer when noticing damages or an incomplete device.
 Never throw away the packaging carton. It could be necessary for storing the device or sending it back to
your dealer in case of damage (also refer to the warranty).
 Caution! Always keep the packaging material on a safe place. Plastic bags and other packing materials
could be dangerous for children and animals.
6. Features
Your ash cleaner has been designed to vacuum cold ashes of wood-burning stoves, fireplaces, barbecues...
 HEPA filter included
 blow function
 caution: for cold ashes only
7. Overview
Refer to the illustrations on page 2 of this manual.
1 handle
2 on-off button
3 suction connection
4 blowing connection
5 cover
8. Assembly
 Before using the ash cleaner, make sure all accessories are correctly fastened.
 Unfasten the fixing clips and remove the cover from the ash collector.
 Attach the filter to the lower part of the cover. Attach the included filter bag to the filter. The filter bag will
protect the filter.
 Replace the cover on the ash collector and fasten the fixing clips.
 Attach the aluminium suction nozzle to the flexible hose.
 Attach the flexible hose to the ash collector.
9. Operation
9.1 Vacuuming Ashes
 Check if the device is assembled well before using it.
 To vacuum ashes, connect the hose to the suction connection.
 Insert the power plug into the mains socket.
 Switch on the device.
 Vacuum the cold ashes.
 Switch off the device.
 Unplug the device from the mains.
 Remove the cover from the ash collector.
 Throw away the ashes in an environmentally safe way.
Leave the ashes to completely cool down prior to vacuuming them!
9.2 Blow Function
This ash cleaner features a convenient blow function. This function allows you to blow away ashes and to move
them to places that are more accessible.
 Check if the device is assembled well before using it.
 To use this blow function, connect the hose to the blowing connection.
 Insert the power plug into the mains socket.
V. 01 – 17/06/2015
TC90400
6 hose
7 ash collector
8 aluminium suction nozzle
9 filter
4 ©Velleman nv