Sliding Door - After Installation - Spartherm PremiumEdition Instrucciones De Montaje

1.2.3 SLIDING DOOR - AFTER INSTALLATION

Conversion from a non-self closing loading door to a self closing
loading door. Carry out the fireplace inserts with two weight shafts in the
same procedure on both sides!
1
Counter
balance
2
Service hatch
3
Retaining Washer
4
Retaining Washer
5
Service hatch
6
GB 8
Follow the next steps for BOTH sides:
1. Remove the refractory panels.
2. Remove the service hatch.
3. Release the locking ring (Allen key 2.5).
Remove the necessary counter-weights.
The number of weights to be removed
must be selected in such a manner that
the door closes slowly with a constant
speed, check the function.
4. Tighten the locking ring (Allen key 2.5).
5. Mount the service hatch.
6. Reinsert the refractory panels.