Dometic CV1004 Instrucciones De Montaje Y De Uso página 15

CV1004
8.2 Vacuuming using the hose socket
I
NOTE
Use the sliding cover to close up the hose connection on the front
of the device if you are vacuuming from the external hose socket.
This increases the level of suction.
➤ To switch on, connect the hose to the external hose socket.
✓ The vacuum cleaner switches on automatically.
➤ To switch off, disconnect the hose from the external hose socket.
✓ The vacuum cleaner switches off automatically.
8.3 Changing the dust bag
A
NOTICE!
It is important for vacuum cleaner suction that the dust bag is fitted
correctly. Please follow the instructions carefully, see fig. e,
page 6 to fig. l, page 7.
I
NOTE
 The dust bag has two openings. One of the two ends has two
arrows. This end must be attached on the device with the
arrows pointing upwards (fig. j, page 7). Make sure the dust
bag is fitted in the correct position.
 Firstly remove the opening from the connecting nozzle in the
device and then remove the other opening from the connecting
nozzle on the front of the device. Hold the openings upwards
to prevent any dust falling out.
 Replace or clean the motor filter after you have changed the
dust bag five times.
➤ Change the dust bag (fig. e, page 6, to fig. l, page 7).
EN
Using the vacuum cleaner
15