TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
• Tune to a station by press the
search upward or downward. The station frequency is shown on the display.
To tune to a preset station:
• To tune to the next preset station, press the 10/M./FOLD.+ button.
• To tune to the previous preset, press the 10/M./FOLD.- button.
AUTO PRESET MEMORY / SCAN
To scan for stations within reception range and save them to preset memory automatically,
press and hold the PLAY/PAUSE/SCAN button. After the unit is nished scanning, the unit
will automatically tune to preset number 1 (P01).
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning automatically.
1. Use the
/TUN.+ or
uuI
preset (e.g., 93.1).
2. Press the P-MODE/M. button. "P01" will ash on the display to indicate that you are saving
the station as Preset Memory 01. (To change the preset memory number, press the 10/M./
FOLD.+ or 10/M./FOLD.- buttons.)
3. Press the P-MODE/M. button to nish saving the station (e.g., P01 is now set to 93.1).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM stations.
USB OPERATION
1. Press the FUNCTION/
2. Plug the USB memory stick to the USB port on top of the unit. Playback will start automatically
from Track 1.
3. To pause playback, press the PLAY/PAUSE/SCAN button on unit. The playing time will ash
on the display.
4. To resume playback, press the PLAY/PAUSE/SCAN button again.
5. To select a desired track, press the
until the desired track appears on the display. The unit will start play automatically.
6. To search for a particular passage during playback, press and hold the
TUN.- button to scanthe current playing track at high speed until desired point (passage)
appears, then release the button for normal playback mode.
7. To select a song which track number exceeds 10, press the 10/M./FOLD.+ or 10/M./FOLD.-
button each time to skip forward/backward 10 tracks, then press the
TUN.- button to select desired track.
8. To select a desired folder (if the USB contains more than one folder), press and hold the
10/M./FOLD.+ or 10/M./FOLD.- button each time to skip forward/backward a folder, then
press the
uuI
/TUN.+ or
Important: The USB port is intended for data transfer only, other devices cannot be
used with this USB connection. The use of USB extension cords is not recommended.
Don't unplug the USB from the unit when playing or reading the USB device.
EN
/TUN.+ or
uuI
/TUN.- button to tune to the station that you want to save as a
I⊳⊳
button on unit to select "USB" mode.
uuI
/TUN.+ or
/TUN.- button to select desired track.
I⊳⊳
/TUN.- button repeatedly. Hold them to
I⊳⊳
/TUN.- button respectively during playing
I⊳⊳
15
/TUN.+ or
uuI
/
I⊳⊳
/TUN.+ or
uuI
/
I⊳⊳