Putting The Blood-Pressure Monitor Into Operation; Inserting The Batteries - Procheck UAA0XB-A Instrucciones De Uso

b) Upper arm cuff:
Type M for arm circumference 22–32 cm or
Type L for arm circumference 32–42 cm
(available as special accessory)

4. Putting the blood-pressure monitor into operation

4.1. Inserting the batteries

After you have unpacked your device, first insert the batteries. The battery compartment is located on the
back side of the device (see illustration).
a) Remove cover as illustrated
b) Insert the batteries (4 x size AA 1,5 V), thereby
observing the indicated polarity.
c) If the battery warning appears in the display,
the batteries are empty and must be replaced by
new ones.
Attention!
• After the battery warning appears, the device is
blocked until the batteries have been replaced.
• Please use «AA» Long-Life or Alkaline 1.5V Batteries.
The use of 1.2V Accumulators is not recommended.
• If the blood-pressure monitor is left unused for long
periods, please remove the batteries from the device.
Functional check: Hold on the O/I button down to test all the display elements. When functioning
correctly all segments must appear.
5