Ducati DPW 2100 Manual De Usuario página 33

1. Turn off the appliance and cut the power
supply;
2. Cut water supply and press the trigger 2-3
times to release the pressure in the hose.
3. Disconnect lance and gun.
4. rotate the lance head to jet model at which
the two metal sheet will be separated com-
pletely.
5. clean the dirt blocking the nozzle by needle
or round paper clips;
6. Clean the dirt in nozzle with washing nozzle
(aiming the nozzle at waterflow for 30-60
seconds).
How to connect the high pressure hose
connector and output tube of unit:
push the hose connector into the output tube
of unit and rotate the screw of hose connector
tightly. (see picks bellow)
Owner´s manual
Connection of gun and lance: put the lance
into the gun as pic 1 and rotate the lance
clockwise till it reaches the position as pic 2.
Then, please test the connection by pulling
the lance to avoid disconnection and accident
hazard.
How to fix quick connector: put it into the
unit´s input screw (see pics below).
English
33