IF Lighting Equinox 1000 Especificación, Garantía Y Manual De Operación página 2

ASSEMBLY & HANGING INSTRUCTION ASSEMBLY & HANGING INSTRUCTION
Preface
The xture should be installed by qualied personal and adhere to all local rules, regulations and codes.
Warnings
The xture is not user serviceable and contains no replaceable parts. The enclosure is not designed to be accessible
and must not be removed. The xture must be returned to the manufacturer for any repairs.
Environmental
The xture is to be installed in damp or dry environments only. Do not install in areas where direct water can come in
contact with the xture. The maximum ambient temperature of the installed environment must not exceed 40°C. The
installed environment should be mechanically ventilated or cooled by other means.
Mounting
Use the supplied hanging hardware to hang the light from a suitable support as follows:
1. Attach one end of the hook to the xture mounting point.
2. Wrap the cord around the support once then attach the free end to the opposite xture mounting point.
3. Repeat for the other side of the xture. See illustrations below.
4. Adjust the length of the hanging cord to set the desired xture height and angle.
Figure 2 - All mounting points should be connected to the hanging hooks
2-English
Figure 1 - Fixture hanger is fully wrapped around the support