Descargar Imprimir esta página

Basic Safety Precautions - Nuova Simonelli MDXS ON DEMAND Instrucciones De Manejo

Ocultar thumbs Ver también para MDXS ON DEMAND:

Publicidad

BASIC SAFETY PRECAUTIONS

Never touch the machine with damp or wet hands.
Never use the machine when barefoot.
Never attempt to unplug the machine by pulling the power cord or the ma-
chine itself.
Do not expose the machine to atmospheric agents (sun rain, etc..).
Never allow the machine to be used by children or by irresponsible persons.
Always use the appliance on a flat, steady surface that is able to support its
weight.
Always unplug the machine from the power supply before performing any
cleaning or maintenance operations.
Do not use jets of water or detergents for cleaning.
In the case of machine breakdown or malfunction switch the machine off and
do not tamper with it.
For repairs contact only an authorized service center and request use of origi-
nal spare parts.
Non-observance of the above precautions may make the machine unsafe for
future use.
Do not leave the machine switched on when not in use. Unplug the machine
when not in use.
Do not obstruct the ventilation and/or heat dissipation openings and/or slits
nor introduce water or any other liquids into same.
Do not obstruct the ventilation and/or heat dissipation openings and/or slits
nor introduce water or any other liquids into same.
Never insert spoons, forks or other utensils into the pouring lip (8), or into the
coffee grain container (2) for any reason whatsoever while the appliance is op-
erating.
Always switch off the appliance before removing blockages from the pouring
lip.
Never place the appliance in water or other liquids.
Should a foreign body stop the motor, switch the machine off immediately and
contact an authorized service center.
Should a foreign body stop the motor, switch the machine off immediately and
contact an authorized service center.
WARNING
Those machines bearing the "EL. MOTOR WITH THERMAL PROTECTION"
indication are equipped with device which protects the motor from overheat-
ing. When this device is engaged, do not attempt to operate the machine: iso-
late the machine from the power supply and eliminate the cause of the trou-
ble before re-starting.
MDXS ON DEMAND
9

Publicidad

loading