Global 493490 Manual Del Usuario

User's manual
Customer Service
US: 1-800-645-2986
1 and 2 Door Depository Safes
493490
Please Read Entire Manual.
Save For Future Reference.
CAUTION
Change the lock combination to a number sequence
other than the factory preset code of 1-6-8 to ensure
security. Do not keep the keys in the safe.
Installing or Changing Batteries
1. Open the safe using the override/emergency key and
locate the battery compartment.
2. Remove the battery box cap.
3. Insert 9-V battery (not included)
4. If the battery has been properly installed there will be
2 beeps and a yellow light will flash twice.
5. Replace battery box cap.
6. Test the code before locking the safe door.
Low Battery Warning: If the battery is low, a red light
will appear when the keypad is pressed. If the battery is
drained, open the safe using the override/emergency key.
Green Light
Red Light
Yellow Light
Manual del usuario
Servicio de atención al Cliente
US: 1-800-645-2986
Burglary and Fire Safe
Models 493490 493491 493493
9V Battery Compartment
493491
Safe Operation And Programming
Your 1st user code is factory set to: 1+2+3+4+5+6+7+8.
Your 2nd user code is factory set to: 1+6+8.
Operating Safe Door
1. Enter the factory preset code: 1+6+8+# on keypad, a
green light will turn on.
2. Turn the handle clockwise to open the safe before the
green light turns off.
3. To lock the safe, close the door and turn the handle
back to the locked position.
4. Invalid Code: 4 beeps.
NOTE: Always make sure the safe is locked before
walking away.
Programing The Digital Combination Lock
Changing the 1st user code (code length:1-8digit code)
1. Open the safe and locate the red reset button on the
inside of the door.
2. Press the reset button, there will be 2 beeps and a
yellow light will appear for 20 seconds.
3. Before the yellow light disappears enter a new code
and press the "*" key. The new code must be between
3 to 8 digits. If the code is valid, the keypad will beep
twice. If a wrong code has been entered or code entry
has failed, there will be 5 beeps, wait for the yellow
light to disappear and repeat above steps 1-3.
1
globalindustrial.ca
Manuel de l'utilisateur
Service à la clientèle
Canada: 888-645-2986
493493
050619