Publicidad
Idiomas disponibles
Idiomas disponibles
Hint: Now is a good time to get out any remaining wrinkles. For
those who have a 300+ with a seat, you will need to stop filling again when the
water is 1-2 inches above the seat to smooth any wrinkles.
Hint: If
you see a leak, don't panic. Turn off the water and tighten the clamps until they
stop leaking.
V
Hint: While the tub is heating turn off the air
control (fewer bubbles) - it's the handle on top of the motor unit, and cover the
tub with the lid. The water temperature will rise at about 1 - 2 °F per hour,
depending on the model and ambient conditions. The Softub Spa will turn off
after the water reaches the set temperature. See WATER TEMPERATURE,
page 11, to adjust the temperature.
It is the responsibility of the tub owner to make sure the above installation
conditions are met as well as to follow the Safety and Warning
Instructions. Softub, Inc. is not responsible for any damage which may
result from water spillage, excessive humidity, or structural loading.
Please take all precautions necessary to ensure years of joyful use of your
Softub spa.
Publicidad
