Learning Cycle - Accessmatic Avanti 4000Z Manual De Usuario

vanti
Opening your life
18. Connection of the motor, conreoller and power switch
Caution: All the connection should be nished under the power o status.
At rst time using, power on, the door will do self-learning. After rst learn cycle, the controller will record the working cycle.
If you want to do self-learning cycle again, please do following steps.
1. When power is o , press the TEST key.
2. Then power on, press the TEST key always 3 second. then the led will show the number '12121' .
3. The door start learning cycle.
17